Zip Water Appliance Unit Boiling, Chilled Unit 120V (BC120V-1) without Regulator or C02

Focal Point is an Authorized Zip Water Retailer!
About The Zip Water Appliance Unit Boiling, Chilled Unit 120V (BC120V-1)
The HydroTap by Zip Water is more than just a water system, it’s cooking made easy and it’s water at its best. That’s because the HydroTap 120V BC command center provides users instant access to filtered boiling and chilled water. This command center is ideal for residential and small commercial applications and can be paired with any of our various tap styles.

• Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm 2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
• Regulator and C02 SOLD SEPERATELY
• Water Connection: 1/2″ BSP – isolation valve is required within 3’ (0.9m) of the installation
• Integral Water Values: All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm 2) PressureLimiting Valve
• Water Supply Requirements: Potable drinking water supply
• Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
• Integral Water Filter: 0.2 micron, 1 size – replace every 1,100 gallons / 4,163 liters or 12 months
• Power Rating: 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
• Dimensions (WxDxH): 13.3″ x 18.2″ x 13.1″ / 339mm x 462mm x 333mm
• Minimum Air Gap: Minimum of 2″ / 50mm clearance on left and right side and 8″ / 200mm above
• Minimum Cabinet Size: 18″ wide x 24″ deep / 457mm wide x 610mm deep
• Maximum Hose Connection Length 3’ / 0.9m (tap to command center)
• Minimum Distance Needed for Installation 15″ / 381mm (interior wall to garbage disposal)
• Dry Weight: 66lbs / 30kg
• Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
• Warranty: 3 years