KRAUS Kore 15″ Drop-In Workstation 16 Gauge Stainless Steel Square Prep Sink with Accessories

Cook, serve, and entertain in style with KRAUS Kore Workstation Sinks. Engineered with an integrated ledge to support custom accessories, this compact kitchen bar sink creates a multifunctional workspace that will supercharge the functionality of your bar or entertainment area. The space-saving design makes this sink ideal for use in galley kitchens, RVs, or as an auxiliary prep sink. The kit includes a durable bamboo cutting board/sink cover that extends your countertop space by allowing you to chop and slice right over the sink. Kore sinks are made with KRAUS TRU16 stainless steel our thickest 16-gauge steel for maximum durability with resistance to dents and damage. Perfect for DIY installation, the drop-in design installs as a top mount with any type of countertop material. The extra-thick mounting deck sits flat against the countertop for a perfectly finished look, with a beveled edge for easy cleaning and 1 pre-drilled hole for easy installation of a kitchen or bar faucet. Thick NoiseDefend sound dampening pads help absorb noise and vibration. The wear-resistant finish is easy to clean and not prone to corrosion, while rounded corners on the sink bottom reduce buildup over time. Channel grooves and a sloped bottom help improve drainage, with a rear-set drain that adds storage space underneath the sink. The installation-ready kit comes with mounting hardware and a drain assembly with matching cover.

Note from DirectSinks about the KWT321-15 – This Medium Sized Prep Sink is 15″ left to right, and front to back. Ideal for a reduced depth cabinet of 18″ or 21″ front to back. Although we show this sink as a Top Mount sink, this sink can also be undermouted according to Kraus. Either way, this is a great Workstation Bar Sink for a reduced depth 18″ Cabinet. Consider this sink when building a tiny home, or  covered outdoor Kitchen

• Details
• Specifications
  & Warranty
• Shipping
  & Returns
• Resources 
• Shop Related

• • • WORKSTATION SINK with integrated ledge for custom-fit accessories so you can prep, cook, and clean up without losing any workspace on the countertop
    • DIMENSIONS: OUTER SINK DIMENSIONS: 15″ L x 15″ W x 9 1/2″ D BOWL DIMENSIONS: 12″ L x 11″ W x 9″ D MINIMUM CABINET SIZE: 18″
    • SINK KIT INCLUDES: Stainless steel workstation sink, heavy-duty cutting board/sink cover, drain assembly with strainer and decorative cover, installation hardware
    • HEAVY-DUTY 16 GAUGE STEEL: Constructed from ultra-durable KRAUS TRU16 stainless steel our thickest 16-gauge steel for superior resistance to dents and damage
    • DROP-IN SINK DESIGN: Perfect for DIY installation, the drop-in design installs as a top mount with any type of kitchen countertop material
    • EXTRA-THICK 4mm MOUNTING DECK sits flat against the countertop, with a beveled edge for easy cleaning 1 pre-drilled hole allows for easy installation of kitchen or bar faucet
    • UNIVERSAL DESIGN with clean lines and tight-radius corners works with any decor style, from traditional to modern
    • COMPACT DIMENSIONS are perfect for use as a secondary bar/prep sink or in smaller spaces like RV and galley kitchens
    • SINGLE BOWL with rear centerset drain and tight-radius corners maximizes workspace and increases room for storage underneath the sink
    • ULTRA QUIET SINK: NoiseDefend sound dampening technology with large silencer pads on all sides of the sink helps prevent noise and vibration
    • FULLY INSULATED with anti-condensation undercoating to reduce the risk of moisture build-up, helping prevent damage to sink and cabinets
    • SUPERIOR DRAINAGE: Sloped bottom with channel grooves helps prevent water from pooling in the sink OPTIMIZED SLOPE helps keep your fragile stemware from tipping over
    • HEAVY-DUTY CUTTING BOARD / SINK COVER is made with durable bamboo, not prone to cracking or warping, with built-in grooves that helps prevent spills Easy to clean non-porous surface is resistant to odors and stains
    • STAINLESS STEEL DRAIN ASSEMBLY W/ COVER helps keep your drainpipe clear Removable cover conceals drain opening for a clean look
    • Certs: ASME A112.19.3-2008/CSA B45.4-08, Uniform Plumbing Code (UPC), National Plumbing Code of Canada, International Plumbing Code (IPC)
    • Collection Name: Kore
    • Installation Type: Top Mount: Typically installed in laminate or wood counter tops
    • Stainless Steel Thickness: 16 Gauge
    • Warranty: Limited Lifetime
    • Sink Certifications: cUPC (ASME A112.19.3/CSA B45.4) 

• • Measurements:

    • Dimensions: 15″ x 15″ 
    • Sink Dimensions: 12″ Wide ( 13″ W at the ledge) x 11″ 
    • Depth of Bowl (in): 9″
    • Minimum Cabinet Size (in): 18″

  • Net Weight (lbs): 12.87

  • Sink Specification PDF
  • Accessories Specification PDF
  • Warranty Information
• • Free Shipping and Free Returns* for orders within the Continental US.
  • Shipping | Returns
• • Installation Instructions
  • DXF File 
  • Kraus Care and Cleaning Guide
  • See our Blog
  • In the Trade? | Wholesale Registration
• • All Kraus Workstation Sinks
  • All Kraus Workstation Accessories
  • Kraus Colander for Workstation Sinks CS-6 
  • Kraus Workstation Dish & Utensil Rack KDR-3
  • Kraus Kitchen Faucets
  • Visit our Lighting Site | ShopforLights