Zip Water Appliance Unit Chilled, Sparkling Unit, 120V, without Regulator or Co2

Focal Point is an Authorized Zip Water Retailer!
About The Zip Water Appliance Unit Chilled, Sparkling Unit, 120V, w/o Regulator or Co2
The HydroTap by Zip Water is sparkling water on-demand and it’s water at its best. That’s because the HydroTap 120V CS command center provides users instant access to filtered chilled still and chilled sparkling water. This command center is ideal for residential and small commercial applications and can be paired with any of our various tap styles.

• Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm 2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
• Regulator and C02 SOLD SEPERATELY
• Water Connection: 1/2″ BSP – isolation valve is required within 3’ (0.9m) of the installation
• Integral Water Values: All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm 2) Pressure Limiting Valve
• Water Supply Requirements: Potable drinking water supply
• Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
• Integral Water Filter: 0.2 micron, 1 size – replace every 1,100 gallons / 4,163 liters or 12 months
• Power Rating: 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
• Dimensions (WxDxH): 11″ x 16″ x 13.1″ / 280mm x 406mm x 333mm
• Minimum Air Gap: Minimum of 2″ / 50mm clearance on left and right side and 8″ / 200mm above
• Minimum Cabinet Size: 18″ wide x 15″ deep / 457mm wide x 381mm deep
• Maximum Hose Connection Length 3’ / 0.9m (tap to command center)
• Minimum Distance Needed for Installation 15″ / 381mm (interior wall to garbage disposal)
• Dry Weight: 66lbs / 30kg
• Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1087; cUL; CEC
• Warranty: 3 years
• Compatible CO2 Cylinder: Zip Water 1.5lb CO2 or 5lb CO 2 (if space allows) with CGA-320 fitting
• CO 2 Operating Pressure: Min 39psi – Max 44psi / Min 2.74 – Max 3.09kg/cm 2